Precautions for use of electric pallet stacker
时间：2021-06-18 17:35 点击次数：
Precautions for use of electric pallet stacker :
Forklift manufacturing industry is in the world's largest and most potential market, with certain development potential.
At the same time, a series of industries derived, such as forklift maintenance, have become an indispensable new industry.
Then maintenance and maintenance can be divided into primary forklift maintenance and secondary forklift maintenance.
Then, when carrying out according to daily maintenance items for electric pallet stacker, the following level maintenance work can be added.
1. Check whether the thermostat is working properly.
2. Check that the transmission is shifting properly.
3. Check the tightness of the fan belt.
4. Check whether the filter screen at the oil inlet of diesel tank is blocked or damaged, and clean or replace the filter screen.
5. Check and adjust valve clearance.
6. Check and adjust the clearance between the brake pads and the brake drum of the hand and foot brakes.
7. Check whether the generator and starter motor are installed firmly, whether they are clean and firm with the terminal,
and check whether the carbon brush and commutator are worn.
8. Replace the oil in the oil pan, check whether the crankcase vent pipe is in good condition, and clean the oil filter and diesel filter element.
9. Check cylinder pressure or vacuum.
10. Check whether the wheel is installed firmly, whether the tyre pressure meets the requirements, and remove the foreign matters embedded in the tread.
11. The parts are disassembled due to maintenance work. The road test of forklift shall be carried out after reassembly.
(1) The braking performance under different degrees shall be free from deviation and snake running. On steep slopes, after the hand brake is tightened, it can stop reliably.
(2) Listen to the engine running under acceleration, deceleration, heavy load or no-load, etc. for abnormal sound.
(3) After a mileage test, check whether there is overheating at the brake, transmission, front axle housing and gear pump.
(4) Whether the lifting speed of fork rack is normal and whether it is trembling.
12. Check whether the multi-way reversing valve, lifting cylinder, tilt cylinder, steering cylinder and gear pump work normally.
