Material Handling Equipment Manufacturer

Ronli provides a variety of pallet stackers available for purchase, including reach stackers, walkie pallet stackers, and high-lift stackers. These electric pallet stackers are commonly used in warehouses, particularly in small areas where forklifts are not practical. By efficiently loading pallets into high-level storage locations, electric pallet stackers maximize the use of vertical space. With maneuverability in mind, Yale pallet stackers are a reliable choice for stacking and retrieving pallets in tight or restricted warehouse or loading dock environments, as well as transporting products over short distances.

The lineup features a wide range of capacities, from 2,000 to 4,000 pounds, and provides options for various duty-cycles, suitable for both occasional use and high-intensity demands.

Ronli's Electric Pallet Stackers are a fantastic option for lifting pallets in large warehouse settings. Their versatile design allows for transportation of products over short distances and efficient pallet lifting, making them a suitable alternative to traditional forklifts.

Features

• Unique reach design: The fork can move back and forth along the body. When picking up and unloading goods, the fork can extend to the front of the body for easy picking up and placing of goods. Then, the fork can be retracted into the body to drive and turn with a small space occupation. This design combines the advantages of counterbalance forklifts and pallet trucks.
• Good stability: It is equipped with a large counterweight and a stable chassis structure. Even when the mast is raised and the fork is extended, it can maintain good stability, ensuring the safety of cargo handling. Some advanced electric reach trucks are also equipped with an intelligent stability system that can automatically adjust the stability of the forklift according to factors such as the weight of the goods, the height of the mast, and the driving speed.
• Multiple control modes: It usually has multiple control modes to meet the needs of different operators and operation scenarios. In addition to the traditional handle control, it may also be equipped with a wireless remote control device. Operators can remotely control the driving, steering, lifting, and extension of the fork of the forklift within a certain distance, which is convenient for operation in some special situations. For example, when the line of sight is blocked in a narrow aisle, the operator can stand in a safer position to perform remote operation.
• Advanced safety configurations: It pays attention to safety performance and is equipped with a series of advanced safety devices. For example, the overload protection system will automatically limit the lifting of the mast and the extension of the fork when the weight of the goods exceeds the rated load of the forklift, preventing the forklift from tipping over due to overloading. There are also audible and visual alarm devices that will emit sound and light warnings when the forklift starts, drives, turns, and approaches obstacles to remind the surrounding personnel to pay attention to safety

Features

• Height-adjustable platform: It has a liftable operation platform that can be flexibly adjusted according to the height of the goods storage, generally reaching a height of several meters, making it convenient for the operator to pick goods on shelves at different heights.
• Precise control performance: It is equipped with a precise control system. The operator can accurately control the driving speed, direction of the vehicle, and the lifting height of the platform through the control handle to ensure that it can accurately reach the required goods position.
• Multifunctional design: Some electric order pickers also have some special functions, such as platform rotation, fork telescoping, etc., further improving their adaptability and flexibility in different operation scenarios. For example, the platform rotation function allows the operator to conveniently pick goods in all directions around the platform without moving the vehicle.
• Intelligent configuration: Modern electric order pickers are usually equipped with intelligent management systems, such as inventory management systems, order management systems, etc. They can record and track the storage location and picking situation of goods in real time, which is convenient for warehouse managers to carry out inventory management and order scheduling, improving the efficiency and accuracy of warehouse management.

Features

• Strong traction capacity: It has a compact design, but its motor and transmission system have been optimized, which can provide strong traction power. It can tow goods weighing several tons or even dozens of tons, and is suitable for various goods handling occasions, such as ports, warehouses, factories, etc.
• Flexible body: It usually adopts a small body size and a flexible steering system, with a small turning radius. It can freely drive and turn in narrow passages and sites, adapt to different working environments, and improve space utilization and work efficiency.
• High degree of intelligence: Some electric tower tractors are equipped with advanced intelligent control systems, such as autonomous driving functions, cargo tracking systems, and remote monitoring systems. The autonomous driving function allows the vehicle to automatically drive according to the preset route and task, improving the accuracy and efficiency of handling. The cargo tracking system can keep track of the transportation status of the goods in real time. The remote monitoring system facilitates managers to remotely manage and dispatch the vehicle and timely understand the vehicle's operation status and fault information.
• Customizability: According to the needs of different users and working scenarios, the electric tower tractor can be customized, such as adding special traction devices, changing the body color and size, and configuring different battery capacities, etc., to meet various special handling requirements.

Features

• Unique side loading and unloading structure: This is its most prominent feature. The forks of the forklift are located on the side of the vehicle body. The picking up, lifting, and handling of goods are achieved through a special hydraulic system and transmission device, which is very different from the structure and operation mode of traditional front loader forklifts.
• Stable driving performance: It adopts a special chassis design and counterweight system. Even when picking up goods from the side, it can maintain good stability, preventing the vehicle from tipping over due to the shift of the center of gravity and ensuring safe and reliable driving under various working conditions.
• Powerful lifting capacity: According to different models and configurations, the side loader forklift usually has a high lifting capacity and can meet the handling needs of various heavyweight goods, easily handling everything from light goods to large goods weighing several tons.
• Suitable for specific industries: Due to its unique design and functions, it is especially suitable for some industries with high space requirements and special-shaped goods, such as the building materials, furniture, and automotive manufacturing industries. In these fields, it can give full play to its unique advantages and improve work efficiency and logistics management levels.

Features

• Compact structural design: The AGV forklift body usually adopts a compact design, which can move flexibly in narrow spaces, adapting to different working environments, such as narrow warehouse aisles and workshop production lines, and improving space utilization.
• Diversified load capacity: According to different application scenarios and cargo weight requirements, the AGV forklift has a variety of load capacities to choose from, ranging from several hundred kilograms to several tons, which can meet the handling needs of various goods.
• Advanced navigation technology: It adopts a variety of advanced navigation methods such as laser navigation, visual navigation, and magnetic navigation, which can accurately determine its own position and driving direction, and achieve high-precision autonomous navigation. It can operate accurately even in complex environments.
• Intelligent control system: It has a powerful control system that can seamlessly connect with the enterprise's logistics management system, production management system, etc., to achieve real-time information interaction and sharing, and realize intelligent scheduling and management, improving the intelligence level of the entire logistics system.
• Low noise and low pollution: Due to the use of an electric drive system, the AGV forklift has low noise during operation and will not produce exhaust emissions. It is environmentally friendly and suitable for places with high requirements for noise and the environment, such as food factories and electronics factories

Features

• Efficient energy conversion: The motors of electric forklifts have a high energy conversion efficiency, which can effectively convert the electrical energy stored in the batteries into mechanical energy to enable the operation of the forklift and the handling of goods. At the same time, some electric forklifts are also equipped with an energy recovery system. When the forklift brakes or goes downhill, the mechanical energy can be converted into electrical energy and charged back into the batteries, further improving the energy utilization rate.
• Precise control performance: The electronic control system of electric forklifts can precisely control the rotation speed and torque of the motors, thus achieving precise control over the driving speed, lifting height, and handling accuracy of the goods of the forklift. This is very important for loading, unloading, and stacking operations in narrow spaces, which can improve the accuracy and safety of the operations and reduce the possibility of goods damage and accidents.
• Multiple battery configuration options: According to different usage requirements and working time requirements, electric forklifts can be equipped with batteries of different capacities and types, such as lead-acid batteries and lithium batteries. Lithium batteries have the advantages of small size, light weight, short charging time, and long cycle life, which can provide more powerful power and longer battery life for electric forklifts, but the price is relatively high. Lead-acid batteries are relatively inexpensive, have mature technology, and are widely used. Users can choose the appropriate battery configuration according to their own economic strength and actual usage situation.
• Compact design: The overall design of electric forklifts is relatively compact, with a relatively small body size and a small turning radius. They can flexibly drive and operate in narrow passages and limited spaces, adapting to various different workplaces and layout requirements and improving space utilization

Features

• Robust structure: In order to withstand heavy loads and harsh working conditions, diesel forklifts usually adopt a robust structural design. Its frame, fork arms, tires, and other components have high strength and wear resistance, which can ensure the stability and reliability of the forklift during long-term use.
• Relatively high speed: The performance of the diesel engine makes the diesel forklift relatively fast in driving speed. Especially when the handling distance is long, it can complete the transportation of goods more quickly, improving work efficiency.
• Relatively high maintenance requirements: Although the engine and mechanical components of diesel forklifts are durable, due to their relatively complex structure, including multiple parts such as the engine, transmission, and fuel system, the requirements for maintenance and upkeep are relatively high. Regular maintenance of the engine, replacement of engine oil, filters, and other components are required to ensure its normal operation.
• Noise and exhaust emissions: The diesel engine generates a certain amount of noise and exhaust emissions during operation. The exhaust gas contains pollutants such as carbon monoxide, nitrogen oxides, and particulate matter. This limits the use of diesel forklifts in some places with high environmental requirements (such as food processing workshops, pharmaceutical warehouses, etc.). However, with the development of environmental protection technology, some new diesel forklifts have reduced exhaust emissions to a certain extent by using advanced exhaust gas treatment devices

Features

• Unique steering and operating mechanism: The 3-way stacker forklift has a special steering system and operating mechanism, enabling it to achieve movement and stacking actions in three directions. Its steering methods are diverse and flexible. Some models change the driving direction by rotating the body, while others achieve operations in different directions by moving the forks or the mast. This unique design is a key feature that differentiates it from other forklifts.
• High lifting capacity: Although it is designed for operation in narrow spaces, the 3-way stacker forklift still has a high cargo lifting capacity. Generally, it can lift goods to higher shelf levels, meeting the needs of high-level storage. Some advanced models can even reach a lifting height of several meters, further improving the space utilization efficiency of the warehouse.
• Precise control performance: Since high precision in operation is required when working in narrow spaces, the 3-way stacker forklift is equipped with a precise control system. Operators can accurately control the driving speed, steering angle, and the lifting and lowering of goods through the control handle, ensuring that the goods can be accurately placed at the target position and reducing the risk of goods damage.
• High degree of intelligence: Modern 3-way stacker forklifts are usually equipped with intelligent management systems, such as an inventory management system and a fault diagnosis system. The inventory management system can record the storage location and quantity of goods in real time, facilitating inventory checking and management for warehouse managers. The fault diagnosis system can detect fault information of the forklift in a timely manner and provide corresponding maintenance suggestions, improving the maintenance efficiency and reliability of the equipment

Features

• Unique articulated structure: This is a remarkable feature of the articulated forklift. The body is divided into front and rear parts through the intermediate articulated point, and the front and rear frames can rotate relative to each other. This structure enables the steering angles of the front and rear wheels to be controlled independently when the forklift turns, thus achieving a smaller turning radius and a more flexible steering method. At the same time, it can also better adapt to the unevenness of the road surface during driving and maintain the stability of the vehicle body.
• Good visibility: The design of the articulated forklift usually provides operators with a wide field of vision. The cab is often located at a relatively high position, and the layout of the mast and forks is optimized to minimize blind spots. This allows operators to clearly observe the loading and unloading area, the goods, and the surrounding environment, which is crucial for safe and efficient operation, especially in complex working conditions.
• High lifting height and capacity: Many articulated forklifts are capable of achieving high lifting heights, which can meet the needs of high - level storage in warehouses. At the same time, they also have a relatively large lifting capacity, usually able to handle heavy - duty goods. This makes them suitable for a variety of material handling scenarios, from general warehouse operations to industrial production lines.
• Stable driving performance: The articulated structure, together with the advanced suspension and braking systems, ensures the stability of the forklift during driving and operation. Whether it is moving forward, turning, or lifting and lowering goods, the forklift can maintain a stable state, reducing the risk of tipping and ensuring the safety of the operator and the goods.
• Easy maintenance: The design of the articulated forklift takes into account the convenience of maintenance. The key components are easy to access, and the layout of the mechanical and electrical systems is relatively reasonable. This makes it easier for maintenance personnel to carry out regular inspections, repairs, and replacements of parts, which helps to reduce the maintenance cost and downtime of the equipment and improve the overall operational efficiency.
• Quiet operation: With the application of advanced noise - reduction technologies and high - quality components, articulated forklifts usually operate relatively quietly. This is beneficial in environments where noise control is required, such as in some warehouses located in urban areas or in production workshops where workers need a relatively quiet working environment. It helps to improve the working conditions and reduce noise pollution

Features

• Unique steering and driving system: The multi-directional forklift adopts special steering and driving technologies. It usually has multiple independently controllable wheels, and these wheels can rotate in different directions to achieve multi-directional driving of the forklift. For example, some models use an all-wheel steering system, where each wheel can control the steering angle independently, allowing the forklift to move flexibly in a small space and even achieve translational and diagonal driving, which is a function that ordinary forklifts do not have.
• Advanced control system: It is equipped with a complex electronic control system, which can precisely control various actions and driving directions of the forklift. Operators can easily achieve multi-directional driving, precise lifting and tilting of the forks, etc. through the operation handle or control panel. Some high-end multi-directional forklifts also have automation functions, such as automatic positioning and automatic loading and unloading, further improving work efficiency and operation accuracy.
• Compact body design: Although the multi-directional forklift needs to accommodate a complex steering and driving system, its body design is usually relatively compact to meet the needs of operation in narrow spaces. Its external dimensions are relatively small, and at the same time, it can ensure sufficient stability and load-bearing capacity, giving full play to its powerful handling function in a limited space.
• Good visibility and comfort: In order to facilitate operators to observe the goods and the surrounding environment during multi-directional operation, the multi-directional forklift usually has a good visibility design. The cab is spacious and bright, the seat is comfortable, and the operation interface is user-friendly, reducing the fatigue of operators and improving the safety and efficiency of work.

Features

• Scissor mechanical structure: This is the most remarkable feature of the scissor lift platform. The lifting of the platform is achieved through the extension and retraction of the scissor arms. This structure is not only simple and efficient but also can realize a large vertical lifting range within a limited space. When the platform descends, the scissor arms can be folded up, occupying a small space, which is convenient for storage and transportation.
• Wide range of lifting heights: The lifting height of scissor lift platforms ranges from a few meters for lower ones to more than ten meters or even higher for some models. Users can choose a platform with an appropriate height according to their actual needs to meet the height requirements of different working scenarios, such as high-altitude cleaning, equipment installation and maintenance, and cargo handling.
• Customizability: In order to meet the specific needs of different customers, scissor lift platforms can be customized. For example, according to different working environments, different platform sizes, materials, and surface treatment methods can be selected; according to the needs of the operation mode, functions such as wireless remote control and PLC intelligent control can be equipped; according to special usage requirements, safety accessories such as guardrails, warning lights, and overload protection devices can also be added.
• Convenient to move (for some models): Some scissor lift platforms are equipped with wheels or other moving devices, making them easy to move within the work site. For example, the self-propelled scissor lift platform driven by electricity can be controlled to move through a remote control or operation panel, and can flexibly reach different working positions, improving the convenience of equipment use and work efficiency

Features

1. Diversified types: There are many types of aerial lifts, such as straight-boom type, articulated-boom type, scissor type, mast type, etc. Each type has its unique structure and applicable scenarios. The straight-boom type is suitable for operations that require a large working height and horizontal extension distance; the articulated-boom type is highly flexible and can operate in complex spaces; the scissor type has good stability and strong load-bearing capacity; the mast type is compact in size and suitable for use in narrow spaces.
2. Advanced power system: It adopts a variety of power methods, including electric, diesel, gasoline, hybrid power, etc. Electrically driven aerial lifts have the advantages of low noise and no pollution, and are suitable for use indoors or in places with high environmental requirements; diesel or gasoline-driven platforms have strong power and long endurance, and are suitable for outdoor operations; the hybrid power system combines the advantages of electric and fuel-driven, and can be flexibly switched in different working scenarios.
3. Intelligent control system: Modern aerial lifts are usually equipped with intelligent control systems that can monitor the working status of the platform in real time, such as height, tilt angle, load, etc. Once an abnormal situation occurs, the system will automatically issue an alarm and take corresponding protective measures to ensure the safety of the operation. In addition, some platforms also have remote monitoring and fault diagnosis functions, which are convenient for equipment maintenance and management.
4. Compact design (for some models): In order to meet the operation requirements in narrow spaces, some aerial lifts adopt a compact design. They are small in size and can pass through narrow passages and doorways. This enables them to operate in places with limited space such as indoor buildings, shopping malls, warehouses, etc., expanding the application range of the equipment

Features

1. Robust and durable structure: It is made of high-strength steel, with good load-bearing capacity. It can bear the weight of forklifts and goods, ensuring stability and reliability during long-term use. Its structural design is reasonable and can withstand various harsh working environments and weather conditions.
2. Adjustable height: It has the function of height adjustment. The height of the platform can be easily adjusted through a hydraulic system or other adjustment devices to adapt to the compartments of trucks of different heights and meet diversified loading and unloading needs.
3. Easy to install and operate: The installation process is relatively simple, and there is no need for complex construction and installation equipment. Operators only need simple training to master the operation method of the yard ramp proficiently and carry out loading and unloading operations conveniently and quickly.
4. Multiple sizes and load-bearing capacities available: According to different usage scenarios and needs, the yard ramp has multiple sizes and load-bearing capacities for selection. Users can choose a suitable yard ramp according to the actual weight of the goods to be handled and the specifications of the forklift to ensure its normal operation and usage effect.
5. Customizability: In order to meet special work requirements, the yard ramp can be customized. For example, adding special anti-slip treatment, customizing different lengths and widths, and equipping special connection devices, etc., to adapt to specific loading and unloading environments and operation requirements

Features

1. Crawler-type traveling mechanism: Most excavators adopt a crawler-type traveling mechanism. This mechanism can provide a large ground contact area and good grip, enabling the excavator to travel and operate stably on soft, muddy, or rugged terrains. At the same time, it can reduce the ground pressure and adapt to various complex construction sites.
2. Rotatable upper structure: The upper structure of the excavator can rotate 360 degrees. This allows operators to flexibly adjust the excavation and unloading directions without moving the fuselage, greatly improving the flexibility and scope of operation.
3. Combination of long and short arms: The working arms of excavators usually consist of long arms and short arms. Through different combinations and joint movements, different excavation depths, heights, and distances can be achieved to meet the requirements of various excavation conditions.
4. Precise hydraulic control system: Advanced hydraulic control systems are used, which can precisely control the movement speed, force, and position of the working devices. Operators can carry out delicate operations according to actual needs, achieving efficient and accurate excavation work.
5. Durability and reliability: The key components of excavators, such as engines, hydraulic systems, and crawlers, are carefully designed and manufactured. They have high strength and wear resistance, and can withstand long-term and high-intensity working loads, ensuring the stable operation of the equipment and a long service life

Features

1. Unique double-end design: The front end of the backhoe loader is a loader structure, and the rear end is a backhoe structure. This double-end design endows it with two different operation capabilities. The front and rear working devices can work independently or in coordination. For example, the backhoe can be used to excavate materials first, and then the front loader can be used for loading and handling.
2. Retractable backhoe arm: The arm of the backhoe part usually has a retractable function, which enables the backhoe loader to reach a longer excavation distance and a greater excavation depth. By adjusting the retractable arm, operations can be carried out under different working conditions, increasing the application range of the equipment.
3. Comfortable operating environment: Modern backhoe loaders are usually equipped with comfortable cabs. The cab is equipped with shock-absorbing seats, air conditioning systems, etc., providing a good working environment for operators, reducing the fatigue caused by long-term operation, and helping to improve work efficiency and the accuracy of operation.
4. Good power performance: It is equipped with a suitable engine that can provide sufficient power to drive the front and rear working devices and the chassis for driving. Whether it is carrying out excavation operations or driving on rough terrain, it can ensure the stable power output of the equipment to meet the construction needs.
5. Can be equipped with a variety of attachments: In addition to the standard bucket and backhoe device, the backhoe loader can also be equipped with a variety of attachments according to different construction requirements, such as a breaker hammer, a grab bucket, etc. The replacement of these attachments is relatively simple, which can further expand the functions of the equipment and make it suitable for more diverse construction tasks